Why Castelion, Why Now
Castelion is moving incredibly fast to develop and deliver advanced defense systems at a time when execution matters more than ever. We believe focus, ownership, and excellence are decisive advantages - and we're building a world-class team to turn bold ideas into real capability.
This is a rare opportunity to join at an early stage, where you'll have significant ownership, collaborate with exceptional teammates, and make a direct, measurable impact on our mission and the future of the company - regardless of your function.
Senior Manufacturing Engineer – Solid Rocket Motor Case Preparation
About Castelion
Castelion is building hypersonic strike weapons for the U.S. military at a scale and speed that matters. We move quickly from design to flight test to production, and we are standing up high-rate manufacturing in Rio Rancho, New Mexico.
Position Overview
We are seeking a Manufacturing Engineer to own case preparation processes for the solid rocket motors that power Castelion's hypersonic strike weapons, including the Blackbeard program. This role focuses on developing, optimizing, qualifying, and executing the processes that turn a bare motor case into one that is ready for propellant casting: hydroproofing, plating, painting, insulation bonding, and propellant liner application. You will drive process improvements, lead the transition from prototype and research builds to scalable high-rate production, and ensure cases are high quality and prepared safely and efficiently. You will work closely with Design, Automation & Controls, Quality, Test, and fellow Manufacturing Engineers to ensure your processes integrate with the larger system, and you will contribute to new product introduction, continuous improvement, and facility ramp-up at our manufacturing sites.
What You'll Accomplish in Your First 12 Months
• Establish safe, repeatable, qualified case preparation processes (hydroproof, plating, paint, adhesive application, rubber bonding, and lining), with process specifications, work instructions, and the equipment to do it at a scale that matters.
• Define and qualify the tooling, fixtures, and equipment needed for both R&D and production-scale case prep, including hydroproof stands, plating and coating lines, and bonding and cure equipment.
• Deliver, and begin executing, a plan to scale from low-rate initial production to full-rate production of thousands of cases per year.
Key Responsibilities
• Own development and optimization of case preparation processes, including incoming case inspection, hydroproofing, plating and surface finishing, painting, adhesive applications, and rubber bonding.
• Hydroproofing: Develop and execute hydrostatic proof test procedures, fixtures, instrumentation, and data acquisition; define pressure profiles and acceptance criteria with Design; manage fill, dewatering, drying, and post-test inspection, including NDE.
• Plating and surface finishing: Develop and control plating and conversion coating processes for case hardware, including bath chemistry, thickness and adhesion verification, and hydrogen embrittlement relief for high-strength steel, whether in-house or with qualified suppliers.
• Painting and coatings: Define surface preparation, masking, application, cure, and inspection for exterior primers and topcoats, protecting bond surfaces and meeting film thickness and appearance requirements.
• Adhesive applications: Own structural adhesive, liner adhesive, and barrier coat adhesive processes, including surface preparation (abrasive blast, solvent or plasma cleaning), mixing, dispensing, application, pot-life and shelf-life control, and cure.
• Rubber bonding: Develop and optimize rubber-to-metal bonding of insulation and boots, including primer and adhesive application, layup, vacuum bagging, press or autoclave cure, and bondline inspection.
Quality, Safety, and Scale-Up
• Drive Design for Manufacturability (DFM), Design for Assembly (DFA), PFMEA, control plans, and statistical process control (SPC) to improve yield, reduce cycle time, and lower cost.
• Define and execute inspection and acceptance strategies in partnership with Quality and Test, including ultrasonic bondline inspection, peel, lap shear, and tensile adhesion testing on witness coupons, surface cleanliness checks, and coating thickness measurement.
• Support new product introduction (NPI) and design change implementation by providing manufacturing input and executing first article inspections and process qualifications.
• Perform root-cause analysis and lead corrective/preventive actions for process issues, bond failures, and defects.
• Collaborate with Automation & Controls to implement robotics (spray, dispense, and handling), vision systems, and digital tools (MES, data analytics) for improved efficiency and traceability of environmental conditions, material lots, and cure histories.
• Author and maintain work instructions, process documentation, and training materials; document and disposition nonconformances; mentor junior manufacturing engineers.
• Ensure compliance with environmental, health, and safety requirements, quality system requirements, and ITAR.
• Support equipment qualification, process validation, and production ramp.
• Interface with suppliers on adhesives, coatings, rubber, plating, and test equipment to resolve issues, manage material shelf life, and improve incoming quality.
Required Qualifications
Education: Bachelor's or Master's degree in Manufacturing Engineering, Mechanical Engineering, Chemical Engineering, Materials Science, Aerospace Engineering, or related field.
Experience:
• 7+ years of manufacturing engineering experience, including hands-on work in at least two of the following: hydrostatic or pressure testing, plating or surface treatment, painting and coatings, adhesive bonding, or rubber-to-metal bonding, in aerospace, defense, or another high-reliability industry.
• Demonstrated success developing and scaling manufacturing processes from prototype to low-rate or rate production.
Technical Skills:
• Working knowledge of surface preparation and adhesion science, including abrasive blasting, chemical cleaning, primer and adhesive systems, cure behavior, and process windows.
• Hands-on experience with bond and coating inspection and test methods, including NDE and mechanical testing.
• Proficiency in CAD (SolidWorks or NX), GD&T, tooling/fixture design, process documentation, and nonconformance disposition.
• Working knowledge of environmental, health, and safety requirements for hazardous chemical processes and pressurized test operations.
Eligibility:
• This position requires access to information and technology controlled under the International Traffic in Arms Regulations (ITAR). Applicants must be U.S. persons as defined under ITAR.
• Applicants must hold, or be able to obtain and maintain, a U.S. government security clearance.
Preferred Experience
• Experience with solid rocket motor case preparation, including insulation, liner, or barrier coat bonding, or with other rocket motor or missile manufacturing.
• Experience with high-strength steel, aluminum, titanium, or composite motor cases.
• Experience designing or running hydroproof or other pressure test systems.
• Prior involvement in facility stand-up, equipment qualification, or production ramp activities.
• Experience in fast-paced environments such as aerospace startups.
• Experience supporting ITAR-controlled and classified programs.
What We're Looking For
• A safety-first mindset with rigorous attention to detail in high-consequence environments where bond integrity and process discipline determine motor performance.
• A data-driven problem solver who is as comfortable on the production floor as at the desk.
• A clear communicator who collaborates across engineering, production, and quality, mentors junior engineers, and manages multiple priorities in a fast-paced setti