Staff Manufacturing Engineer, Sensors and Avionics
Costa Mesa, CA (OC-00)full time
On Site
senior
$147k–$196k
H1B: no
Anduril Industries Staff Manufacturing Engineer responsible for manufacturing development and process control of avionics and sensor assemblies. Mentors engineers and provides technical leadership to technicians building these assemblies.
Responsibilities
Own manufacturing process development and documentation for PCBAs, box-level electronic assemblies and integrated electronic units, to space-grade workmanship standards (IPC-610/620 Class 3, IPC J-STD-001 Space Addendum, NASA-STD-8739 series).
Own manufacturing and integration processes for sensor packages: visual and infrared optical trains, star and sun trackers, telescopes and interferometers — including optical alignment, cleanliness and contamination control.
Own processes for navigation and radar assemblies — GPS and IMU navigation solutions, radar apertures and front ends — including alignment, calibration interfaces and RF handling discipline.
Own processes for communications assemblies across UHF through EHF bands — TT&C, command and control, and high-data-rate links — plus flight instrumentation.
Own power systems and harnessing: power distribution assemblies, cable and harness build to IPC-620 and NASA-STD-8739.4, routing, bonding and grounding.
Serve as the principal production technical interface to our internal sensor partners and to external component, sensor and box vendors, assessing capability and driving manufacturability and workmanship improvements alongside Supplier Quality.
Drive Design for Manufacturability and Assembly into these designs before CDR, and use design and statistical process control to reduce production test burden rather than absorbing it.
Specify and qualify the assembly tooling, fixtures and test equipment these assemblies need, and own root cause analysis, PFMEA, process validation and first article inspection for the processes you own.
Act as an owner and evangelist for Anduril's Manufacturing Development Process (MDP), and use Foundry and Teamcenter as the system of record.
Mentor and grow the engineers in this discipline — avionics, sensors, power systems and harnesses — and provide hands-on technical leadership to the technicians building these assemblies.
Qualification
Bachelor's degree in ElectricalHands-on depth in at least two ofWillingness to travel up to 25%RadarHarness and cable design capability$147
Required
Bachelor's degree in Electrical, Mechanical, Manufacturing or Industrial Engineering, or a related technical discipline.
8+ years of manufacturing engineering experience in aerospace, space, defense or another high-reliability industry, with a track record taking electronic or electro-optical hardware from development into production.
Deep knowledge of high-reliability electronics workmanship standards — IPC-610/620 Class 3, IPC J-STD-001 Space Addendum, and the NASA-STD-8739 series for soldering, wire harness and conformal coating.
Expert understanding of PCBA processes (SMT, through-hole, conformal coating, potting, component selection and screening) and box-level assembly (cabling, harnessing, mechanical integration, thermal, EMI/EMC).
Hands-on depth in at least two of: electro-optical or infrared sensor assembly and optical alignment; RF or radar assembly and test; navigation units (GPS, IMU); power distribution and harness manufacture.
Has reduced production test burden through design or statistical process control — combining, moving or eliminating tests on the strength of data rather than absorbing whatever the design requires.
Has served as the manufacturing technical interface to internal engineering partners or external electronics and sensor suppliers, including capability assessment and workmanship or process improvement.
Demonstrated expertise in root cause analysis (8D, 5-Why, Fishbone), PFMEA, corrective and preventive action, process validation and first article inspection.
Currently possesses and is able to maintain an active U.S. Secret security clearance
Willingness to travel up to 25%
Preferred
Direct experience manufacturing satellite or spacecraft avionics, sensors or payloads (flight hardware), including cleanroom operations and contamination control.
Radar, optical sensor or millimeter-wave aperture manufacturing experience — at a premium for this role.
Harness and cable design capability, including schematic reading and drawing in Altium, AutoCAD Electrical or similar.
Took an electronics or electro-optical product from prototype or LRIP into rate production of 100+ units per year, including automation or semi-automation of assembly.
$147,000—$196,000 USD
The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: