Responsibilities

We're looking for a Battery Engineer to own the design, development, integration, and qualification of our spacecraft battery systems. You'll be responsible for developing reliable, high-performance energy storage solutions that power the spacecraft through eclipse periods, peak load events, and critical mission operations.
This is a hands-on individual contributor role for an engineer who enjoys taking battery systems from concept through flight. You'll work closely with power electronics, avionics, thermal, mechanical, and software engineers to develop flight-ready battery hardware capable of operating safely and reliably in the harsh environment of space.
Own the architecture and development of spacecraft batteries from concept through flight qualification
Design battery packs, module architectures, and electrical interconnects (e.g., laser welding, wire bonding, busbar design) to meet mission performance requirements, including series/parallel cell configuration trade-offs
Develop a battery management system (BMS), including cell balancing (passive and active balancing techniques), state-of-charge (SOC) and state-of-health (SOH) estimation (coulomb counting, OCV-based, and model-based/Kalman filtering approaches), fault detection, and protection strategies (overvoltage, undervoltage, overcurrent, overtemperature, cell imbalance)
Select battery cell chemistries and components (e.g., NMC, NCA, LFP, or primary Li-CFx for long-duration/low-power missions) based on mission requirements, specific energy/power trade-offs, cycle life, reliability, and environmental constraints
Perform battery sizing, capacity analysis, degradation modeling (capacity fade, impedance growth), depth-of-discharge (DoD) management for cycle life targets, and lifecycle assessments
Develop battery charging and discharge strategies in partnership with the spacecraft power systems team, including coordination with solar array power management (MPPT vs. direct energy transfer) and peak-load discharge current limiting
Define thermal management requirements and collaborate with thermal engineers to ensure safe battery operation, including thermal runaway propagation mitigation (cell-to-cell spacing, thermal barriers, venting design) and cold-survival heater strategy
Lead battery integration, validation, environmental qualification, and acceptance testing, including vibration/shock (per GEVS/NASA-STD-7001 or ECSS equivalents), thermal vacuum cycling (TVAC), vacuum outgassing (ASTM E595), and abuse testing (overcharge, short circuit, crush, penetration, thermal abuse)
Investigate battery performance, reliability, and failure modes through analysis and testing, including root-cause failure analysis and corrective action development
Support manufacturing, supplier selection, DFM/DFT reviews, cell matching/sorting processes, weld quality inspection (including X-ray/CT inspection for internal defects), and production readiness

Qualification

BSExperience with battery testingKnowledge of NASAExperience supporting vibrationFamiliarity with MATLAB/Simulink

Required

BS, MS, or PhD in Electrical Engineering, Mechanical Engineering, Materials Science, Chemical Engineering, or a related discipline
3+ years developing battery systems for aerospace, automotive, defense, or other high-reliability applications
Experience designing battery packs and energy storage systems, including cell/module/pack architecture and electrical interconnect design
Knowledge of lithium-ion battery chemistry (NMC, NCA, LFP), degradation mechanisms, and safety considerations
Experience developing or integrating Battery Management Systems (BMS), including cell balancing, SOC/SOH estimation, and fault protection architectures
Experience with battery testing, characterization, and validation, including cycle life testing, performance characterization across temperature, and abuse/safety testing
Familiarity with battery modeling (equivalent circuit models or electrochemical models), lifecycle analysis, and performance prediction
Strong analytical and hands-on hardware debugging skills

Preferred

Experience developing spacecraft or satellite battery systems
Experience with radiation effects on battery systems and space-qualified components
Experience with battery thermal modeling and thermal runaway mitigation, including coupled thermal-electrochemical simulation (e.g., COMSOL)
Knowledge of NASA, ECSS, or aerospace battery qualification and safety standards (e.g., MSFC-STD-3012 lithium-ion battery safety guidelines, AFSPCMAN 91-710 range safety requirements, GEVS/NASA-STD-7001 environmental verification, ECSS-E-ST-20-01)
Experience supporting vibration, shock, thermal vacuum, and environmental testing campaigns
Experience with battery safety analysis including FMEA, fault tree analysis (FTA), and hazard assessments, along with familiarity with abuse/safety test standards (UN 38.3, IEC 62133, UL 1642/2054)
Familiarity with MATLAB/Simulink, Python, or equivalent tools for battery modeling, SOC/SOH algorithm development, and analysis
Experience with isolated cell monitoring architectures and BMS IC platforms (e.g., isoSPI daisy-chain architectures common in EV/aerospace battery stacks)

Sr. Battery Engineer at Cowboyspace · LumiJobs

Sr. Battery Engineer

Responsibilities

Qualification

Required

Preferred

Benefits

Company

Cowboyspace

More roles at Cowboyspace